jeffquitney
patreon
How Steel Is Made ~ 1943 Bethlehem Steel (Steel for the Armed Forces, Part 1)
🕑 Added 2020-05-12 18:27:24 +0000 UTCmore at http://quickfound.net/
Originally a public domain film from the Library of Congress Prelinger Archives, slightly cropped to remove uneven edges, with the aspect ratio corrected, and one-pass brightness-contrast-color correction & mild video noise reduction applied.
The soundtrack was also processed with volume normalization, noise reduction, clipping reduction, and/or equalization (the resulting sound, though not perfect, is far less noisy than the original).
http://en.wikipedia.org/wiki/Steelmaking
Wikipedia license: http://creativecommons.org/licenses/by-sa/3.0/
Steelmaking is the second step in producing steel from iron ore. In this stage, impurities such as sulfur, phosphorus, and excess carbon are removed from the raw iron, and alloying elements such as manganese, nickel, chromium and vanadium are added to produce the exact steel required.
Older processes
The earliest means of producing steel was in a bloomery. Early modern methods of producing steel were often labour-intensive and highly skilled arts...
An important aspect of the industrial revolution was the development of large-scale methods of producing forgeable metal (bar iron or steel). The puddling furnace was initially a means of producing wrought iron, but was later applied to steel production.
The real revolution in steelmaking only began at the end of the 1850s. The Bessemer process was the first successful method of steelmaking in quantity, followed by the open hearth furnace.
Modern processes
Modern steelmaking processes are broken into two categories: primary and secondary steelmaking. Primary steelmaking uses mostly new iron as the feedstock, usually from a blast furnace. Secondary steelmaking uses scrap steel as the primary raw material. Gases created during the production of steel can be used as a source of power.
Primary steelmaking
Basic oxygen steelmaking is a method of primary steelmaking in which carbon-rich molten pig iron is made into steel. Blowing oxygen through molten pig iron lowers the carbon content of the alloy and changes it into low-carbon steel. The process is known as basic due to the pH of the refractories—calcium oxide and magnesium oxide—that line the vessel to withstand the high temperature of molten metal.
The process was developed in 1948 by Robert Durrer and commercialized in 1952--1953 by Austrian VOEST and ÖAMG. The LD converter, named after the Austrian towns Linz and Donawitz (a district of Leoben) is a refined version of the Bessemer converter where blowing of air is replaced with blowing oxygen. It reduced capital cost of the plants, time of smelting, and increased labor productivity. Between 1920 and 2000, labor requirements in the industry decreased by a factor of 1,000, from more than 3 worker-hours per tonne to just 0.003. The vast majority of steel manufactured in the world is produced using the basic oxygen furnace; in 2000, it accounted for 60% of global steel output. Modern furnaces will take a charge of iron of up to 350 tons and convert it into steel in less than 40 minutes, compared to 10--12 hours in an open hearth furnace.
Secondary steelmaking
Secondary steelmaking is most commonly performed in an electric arc furnace.
HIsarna steelmaking
The HIsarna steelmaking process is a process for primary steelmaking in which iron ore is processed almost directly into steel. The process is based around a new type of blast furnace called a Cyclone Converter Furnace, which makes it possible to skip the process of manufacturing pig iron pellets that is necessary for the basic oxygen steelmaking process. Without the necessity for this preparatory step the HIsarna process is more energy-efficient and has a lower carbon footprint than traditional steelmaking processes...
