Andy Olives Casting Couch
patreon
How to Change a Tire in Soft Sand
🕑 Added 2025-10-16 02:32:57 +0000 UTC15
Changing a tire on soft sand is difficult due to the unstable ground. To prevent getting stuck or having the jack sink, you should use a firm base like a piece of plywood, use a low gear, drive slowly, and avoid sudden movements. Additionally, consider lowering your tire pressure to help the tires "float" better on the sand before you even need to change a tire.
Before you change a tire
Lower tire pressure:
Before entering the sand, lower your tire pressure to about 18-25 PSI for better flotation. This will increase the tire's surface area, helping it to drive on top of the sand instead of sinking.
Use a firm base:
When you need to use a jack, place a flat, stable object like a piece of plywood underneath it to prevent the jack from sinking into the sand.
Have the right tools:
Carry traction boards, a shovel, and a tow strap in case you need to dig out, create a better path, or get unstuck.
If you need to change a tire
Use a firm base:
Place a piece of plywood under the jack to keep it from sinking into the sand.
Choose a stable location:
If possible, move the vehicle to a spot where the sand is more compact before you start changing the tire.
Lower tire pressure:
Lower your tire pressure before you start the change. This will help the vehicle "float" better on the sand and reduce your chances of getting stuck while you're working.
Avoid sudden movements:
When driving, maintain a steady speed and avoid sudden braking or sharp turns. If you need to change gears, do it smoothly to prevent the tires from spinning.
Engage 4WD if needed:
If your vehicle is a permanent 4WD, lock the center differential if you have one. This will improve stability and traction on the sand.
