The Hammers are here !
🕑 Added 2022-05-10 17:32:37 +0000 UTCWell here it is finally - the Mjolnir pack :D
I know there are quite a few models out there so i had to do a bit of extra to make it worth your while.
Included are:
- Regular Mjolnir - i created the body so its easy to print without supports, and added structural strength. There is a 10mm dovel intended for the hilt, and 8x8 pins or magnets to be used at your own discretion depending on what you would like more :)
- Love and thunder Mjolnir ( both damaged and with holes for lights) - once again 8x8 pins or magnets - i recommend you close one side with pins and leave the other one to be used with magnets so you can access the electronics.
IF you dont wish to use any lights on the inside, just print the damaged one "without holes"
- regular and L&T for small scale resin printing - yup 1:6 scale made for resin printing. The opening on the hilt for the strap is still there, so if you can find some small straps you will get yourself some nice keychains :)
I've also added updated Plates for Llighthammer - however keep in mind that top plate will be a tad difficult to print - so i went over the board on the "warning" signes for that one :D I was actually debating not to put it as aprt of the release, but oh well, the more the better :D - taht one is in the LIGHTHAMMER FOLDER and those who have access to it will find it there :)
- WILL BE ADDED SOON:
- im working on several stands for the Hammer, so they will be added tomorrow as well :)
This is it for now, enjoy the Mjolnir pack :)
Comments
Marko Makaj
any time :)
Chris West
perfect! I didn't see that folder. just added it and I'm printing now. thanks.
Marko Makaj
they are not bcs they are 2 diferent hammers - but in the "lighthammer" folder you have "love and thunder" inspired side panels. you can however also use love and thunder hammer to attach to the lightsaber tho, so even tho you cant mix lighthamemr/love and thunder parts , you can use lightsaber hilt on love and thunder, or you can print new Lighthammer panels that are uploaded in the lighthammer folder :)
Chris West
Now that I have Lighthammer done, I wanted to make the Love and Thunder version. After looking at the files I found that they aren't "compatible". Seems these are for a free standing hammer and not a Lighthammer version. Any plans to modify them to work with Lighthammer? I could do it myself, but if you're already working on it, I might as well be patient.
Marko Makaj
Didnyou mean to remove each ring from the handle ? If thats the case than unfortenatrlly no bcs i dont see that being beneficial in any way and waaay to difficult to print and then put back in place :)
Joseph brents
Any plans to seperate the handle pieces ?
Steve Edmonson
yeah not to worry about the fail, for some reason that printer does not like the file I was printing..LOL but the hammer is going smooth
Marko Makaj
ahaha nooo, but you got this :D
Marko Makaj
cant wait to see it :)
Marko Makaj
Awesome, you will have a good time with those, the sabers are insanelly fun to play with :)
Marko Makaj
So happy to hear that :) thank you so much :)
Marko Makaj
haha sure thing :) any my pleasure :)
Marko Makaj
happy to hear :)
Steve Edmonson
update...LOL could not wait, had a print fail, so, this beauty went on the printer.
Steve Edmonson
Going on the printer tomorrow morning
Chris West
just in time! my sabers from Aliexpress should arrive this week. I've been waiting so I can print this. Now I have another version to try!
richroks
As always, your work becomes my go-to file for anything I want printed. Thank you again for top notch quality!
Richard Cunningham
Yes. As soon as I saw it I knew what had to happen!!! 😉 Thanks Marko
Robert Martin
Sweet I have a buddy that wants one thank you