Our Creation
patreon
Sea Pickles Production Unit Mk 1
🕑 Added 2025-08-08 16:36:56 +0000 UTCThis machine uses a combination of bonemeal and a minecart contraption to grow and harvest sea pickles.
Build Request Submitted by: Benjamin Gunderson
WARNING: This is a very technical build and is prone to easily breaking if not set up correctly. It's recommended to be well knowledged of the create mod if you're choosing to build this machine.
Estimated Required Inputs Per Hour:
6 Stress Units x RPM
~ Bonemeal x RPM
Estimated Outputs Per Hour:
~ Sea Pickles x RPM
Required Mods:
The Create Mod
Linking to Your Network:
1. Connect the frogports to your chain conveyor system.
2. Link the stock link located on the output packager to your network.
3. Use factory gauges, restockers, or signs to route items to their respective input frogports located on the front, labeled by signs to let you know what to assign to the input.
Setup Guide:
1. Place water above the cobblestone in the middle of the machine.
2. Now, replace the cobblestone with any coral block of your choice.
3. Apply filters to both smart observers on the machine to the coral block that they are facing.
4. Place a sea pickle in the middle of the 3x3 sea pickle harvesting area.
5. Apply rotational power anywhere to the machine at 256 rpm, ensuring everything spins in the correct direction. (You can run the machine at other speeds; however, the machine is calibrated to 256 rpm and is recommended to run at that speed.)
6. Adjust the pulse extender to match the timings of the machine, which will vary from world to world. Sometimes it can also break from water glitching through during the setup phase.
7. Make sure to adjust the threshold switch attached to the vault to the desired number of items you want the vault to hold.
Troubleshooting:
Machine made on Create v6.5, Minecraft Snapshot 1.21.1, NeoForge
Machine tested on Create v6.5, Minecraft Snapshot 1.20.1, Forge
