Raki-Box
patreon
BOXSKULL ORGINAL (BSO) - Skeleton Chameleon
🕑 Added 2025-11-19 01:35:30 +0000 UTCThe first BSO drop is a little closer to our standard fare.
This design is based on a chameleon. This is the full version! It includes both chameleons (clinging on the branch, standing), I also included the branch, all together it is a really amazing print I know you will like the final result. This little chameleon skeleton can be printed in place and is very easy to print.
You will only need to assemble the tail, which is designed to curve. Read the instructions carefully to choose the best version for your type of filament (you will need a good calibration, especially for wall expansion). At the suggestion of my subscribers I decided to include several versions of the glue, use the one that best fits your configuration and printer.
You will also find 4 versions for the glue, print the one that best suits the type of filament you use. Remember that some PLA filaments are fragile (like PLA Silk) and the bonds will probably break if they are too tight or if you use too much snap.
Here is a sample video to adjust the tail parts and finally be able to pose it:
https://youtube.com/shorts/z9sh-bLBU5Q?si=p-87kh7D5Ijrr_40
3D printing settings
0.1 - 0.2 layer height all pieces (depending on the quality you want).
Do not need supports.
Make sure you have good adhesion.
Print in place, no additional supports needed. 10-20% infill.
3 walls if a 0.4 mm nozzle is used.
Comments
Nick North
Printed in white glow in the dark.
David Hefner
I printed the v1 loose version tail, and tried locking it to curve it, NOW I can't get about half the links to separate, lol..
Pinka
I really love this design. But I don't understand how to make the hook tail.
Rob Klockman
The top pinned post has all the download links and other important info
Katrina Torrance
How do we access it to download it? Thanks
Jessica Parmenter
ready to send to the printer :)
PrintedAF
Sweet!!
Eddie Funxta
Love it!!!!
